[OpenAFS] Help - Failed to load AFS client

Tommy Mann tmann@black.ils.unc.edu
Sun, 3 Nov 2002 15:55:13 -0500 (EST)


The IP addresses are correct and the machines are running.  In fact, I 
checked the ThisCell and CellServDB file on another server where AFS *is* 
running correctly -- the server addresses are identical to mine.  

How can I check if I can connect to these IP addresses from my Linux box?  
I pinged the IPs and that worked fine....

Tommy


On 3 Nov 2002, Derek Atkins wrote:

> Hmm..  Are those server IP addresses correct?  Can you actually
> reach those machines?  Are the AFS Servers actually running?
> 
> The "cannot contact..." messages seem to imply that something at
> the network layer is failing.
> 
> -derek
> 
> Tommy Mann <tmann@black.ils.unc.edu> writes:
> 
> > ThisCell:
> > isis.unc.edu
> > 
> > CellServDB
> > >isis.unc.edu              # University of North Carolina at Chapel Hill
> > 152.2.1.5                       #db0.isis.unc.edu
> > 152.2.1.6                       #db1.isis.unc.edu
> > 152.2.1.7                       #db2.isis.unc.edu
> > >physics.unc.edu           # University of NC at Chapel Hill Physics/Astro
> > 152.2.5.2                       #valerian.physics.unc.edu
> > 152.2.5.3                       #augustus.physics.unc.edu
> > 152.2.7.67                      #nerva.astro.unc.edu
> > >acpub.duke.edu            #Duke Academic Computing (clusters)
> > 152.3.233.4                     #clarke.acpub.duke.edu
> > 152.3.233.5                     #delany.acpub.duke.edu
> > 152.3.233.6                     #ellison.acpub.duke.edu
> > 
> > There's actually a really long list in the CellServDB file, but they're 
> > all similar to what I pasted above (the top one is most important for what 
> > I'm doing, I think).
> > 
> > Any idea why I'm getting this error message when I try to start AFS up?
> > 
> > Thanks!
> > Tommy
> > 
> > 
> > 
> > On 3 Nov 2002, Derek Atkins wrote:
> > 
> > > What do you mean "added the appropriate cell in ThisCell"?  What does
> > > "ThisCell" look like?
> > > 
> > > Does CellServDB have the appropriate values for your cell?
> > > 
> > > -derek
> > > 
> > > Tommy Mann <tmann@black.ils.unc.edu> writes:
> > > 
> > > > Hi!  I've just installed the OpenAFS rpms on my RH 7.3 box.  I've added 
> > > > the appropriate cell in ThisCell (/usr/vice/etc), and also downloaded my 
> > > > cell's appropriate CellServDB.  However, when I run /etc/rc.d/init.d/afs 
> > > > start I get the following message:
> > > > 
> > > > Found libafs-2.4.18-3-i686.o from SymTable... Loading...
> > > > Failed to load AFS client, not starting AFS services.
> > > > 
> > > > What's going on here???  I checked a few other things out and here's what 
> > > > I found:
> > > > 
> > > > In /var/log/messages I see the following errors:
> > > > 
> > > > Nov  2 15:24:34 black kernel: You must reload the AFS kernel extensions 
> > > > before remounting AFS.
> > > > Nov  2 15:25:15 black kernel: afs: Lost contact with volume location 
> > > > server 152.2.1.7 in cell isis.unc.edu
> > > > Nov  2 15:25:15 black kernel: afs: Lost contact with volume location 
> > > > server 152.2.1.7 in cell isis.unc.edu
> > > > Nov  2 15:26:13 black kernel: afs: Lost contact with volume location 
> > > > server 152.2.1.6 in cell isis.unc.edu
> > > > 
> > > > Basically, I get the "Lost contact with volume loation server..." error 
> > > > twice each minute continuously.
> > > > 
> > > > Also, if I run /usr/vice/etc/afsd I get:
> > > > 
> > > > afsd: All AFS daemons started.
> > > > afsd: Can't mount AFS on /afs(22)
> > > > 
> > > > I don't really know where else to look.  Any help would be greatly 
> > > > appreciated!!!
> > > > 
> > > > Thanks!
> > > > Tommy
> > > > tmann@black.ils.unc.edu
> > > > 
> > > > 
> > > > _______________________________________________
> > > > OpenAFS-info mailing list
> > > > OpenAFS-info@openafs.org
> > > > https://lists.openafs.org/mailman/listinfo/openafs-info
> > > 
> > > 
> > 
> 
>