[OpenAFS] Re: client crashes 1.4.14
Ted Creedon
tcreedon@easystreet.net
Wed, 19 Jan 2011 09:10:58 -0800
--0003255735f2cc6f78049a36197e
Content-Type: text/plain; charset=ISO-8859-1
I can start the client (on the server geronimo) and get an aklog token
Since the -localauth switch works, I asssume its keyed properly (single des
same kvno)
If I do an ls /afs the cpu stops and a hard reset is required
I suspect that the problem is in the mounts
I have 3 more machines to experiment with all are 2.6.x kernels and the
1.4.14 tar.gz release source
There are no error messages (the 1.6pre1 seemed to work on geronimo except
for the RX cleanup errors.).
the volumes all salvage OK & sync
Ted
On Tue, Jan 18, 2011 at 6:25 PM, Andrew Deason <adeason@sinenomine.net>wrote:
> On Tue, 18 Jan 2011 15:54:42 -0800
> Ted Creedon <tcreedon@easystreet.net> wrote:
>
> > 1.4.14 openafs on 2.6.34.7-0.7 linux
>
> Distro? And does this occur on 1.4.12.1? Because 1.4.14 is almost
> exactly the same as 1.4.12.1.
>
> > the following happens when the client is started
> >
> > Message from syslogd@geronimo at Jan 18 15:50:59 ...
> > kernel:[ 6918.225730] invalid opcode: 0000 [#1] PREEMPT SMP
> >
> > Message from syslogd@geronimo at Jan 18 15:50:59 ...
> > kernel:[ 6918.225737] last sysfs file:
> >
> /sys/devices/pci0000:00/0000:00:14.1/host1/target1:0:0/1:0:0:0/block/sdb/uevent
>
> We need more than that. All of the stuff around/after 'Call Trace:' or
> similar, and anything with 'openafs:' would probably help to at least
> point at something. You also typically want the text immediately
> _before_ the "[cut here] ----- [please bite here] ---- " marker.
>
> All of that should be in syslog (possibly kern.log, or 'messages', or
> wherever the relevant syslog messages get sent to)
>
> --
> Andrew Deason
> adeason@sinenomine.net
>
> _______________________________________________
> OpenAFS-info mailing list
> OpenAFS-info@openafs.org
> https://lists.openafs.org/mailman/listinfo/openafs-info
>
--0003255735f2cc6f78049a36197e
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
I can start the client (on the server geronimo) and get an aklog token<br><=
br>Since the -localauth switch works, I asssume its keyed properly (single =
des same kvno)<br><br>If I do an ls /afs the cpu stops and a hard reset is =
required<br>
<br>I suspect that the problem is in the mounts<br><br>I have 3 more machin=
es to experiment with all are 2.6.x kernels and the 1.4.14 tar.gz release s=
ource<br><br>There are no error messages (the 1.6pre1 seemed to work on ger=
onimo except for the RX cleanup errors.).<br>
<br>the volumes all salvage OK & sync<br><br>Ted<br><br><div class=3D"g=
mail_quote">On Tue, Jan 18, 2011 at 6:25 PM, Andrew Deason <span dir=3D"ltr=
"><<a href=3D"mailto:adeason@sinenomine.net">adeason@sinenomine.net</a>&=
gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt 0.8ex; borde=
r-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"><div class=3D"im"=
>On Tue, 18 Jan 2011 15:54:42 -0800<br>
Ted Creedon <<a href=3D"mailto:tcreedon@easystreet.net">tcreedon@easystr=
eet.net</a>> wrote:<br>
<br>
> 1.4.14 openafs =A0on 2.6.34.7-0.7 linux<br>
<br>
</div>Distro? And does this occur on 1.4.12.1? Because 1.4.14 is almost<br>
exactly the same as 1.4.12.1.<br>
<div><div></div><div class=3D"h5"><br>
> the following =A0happens when the client is started<br>
><br>
> Message from syslogd@geronimo at Jan 18 15:50:59 ...<br>
> =A0kernel:[ 6918.225730] invalid opcode: 0000 [#1] PREEMPT SMP<br>
><br>
> Message from syslogd@geronimo at Jan 18 15:50:59 ...<br>
> =A0kernel:[ 6918.225737] last sysfs file:<br>
> /sys/devices/pci0000:00/0000:00:14.1/host1/target1:0:0/1:0:0:0/block/s=
db/uevent<br>
<br>
</div></div>We need more than that. All of the stuff around/after 'Call=
Trace:' or<br>
similar, and anything with 'openafs:' would probably help to at lea=
st<br>
point at something. You also typically want the text immediately<br>
_before_ the "[cut here] ----- [please bite here] ---- " marker.<=
br>
<br>
All of that should be in syslog (possibly kern.log, or 'messages', =
or<br>
wherever the relevant syslog messages get sent to)<br>
<font color=3D"#888888"><br>
--<br>
Andrew Deason<br>
<a href=3D"mailto:adeason@sinenomine.net">adeason@sinenomine.net</a><br>
<br>
_______________________________________________<br>
OpenAFS-info mailing list<br>
<a href=3D"mailto:OpenAFS-info@openafs.org">OpenAFS-info@openafs.org</a><br=
>
<a href=3D"https://lists.openafs.org/mailman/listinfo/openafs-info" target=
=3D"_blank">https://lists.openafs.org/mailman/listinfo/openafs-info</a><br>
</font></blockquote></div><br>
--0003255735f2cc6f78049a36197e--