[OpenAFS] afsdf new release
Steve Simmons
scs@umich.edu
Wed, 17 May 2017 10:38:39 -0400
Many thanks, both for the catch and the patch. Can you give me the
name of the cell where you bumped into this so I can test?
Thanks,
Steve
On Wed, May 10, 2017 at 10:37 AM, Heinz-Ado Arnolds
<arnolds@mpa-garching.mpg.de> wrote:
> Dear Steve,
>
> thanks a lot for your tool. Small problem: if a server currently has no p=
artitions, you'll get a division by zero when calculating $pct. You'll find=
a simple patch enclosed. (Formatting is done to keep the patch small. Ther=
e should be an additional indentation to all lines inside the new if{} clau=
se for sure.)
>
> New output:
>
> lnx-14 a 9 1 8 10.67%
> b 9 0 9 1.20%
> c 9 4 5 40.88%
> d 9 4 5 47.01%
> Subtotal 39 9 29 24.95%
>
> lnx-16 -
>
> lnx-17 -
>
> lnx-18 a 9 0 9 0.85%
>
>
> Kind regards,
>
> Ado Arnolds
>
> On 09.05.2017 19:23, Steve Simmons wrote:
>> About 10 years back I posted a 'afsdf' command to openafs-info. Many imp=
rovements were made based on suggestions here, but I never got round to re-=
posting it. In general, the command does a df-ish disk usage report across =
an entire cell, with various permutations on roll-ups, display compaction, =
and so forth. Used in my favorite two modes:
>>
>> $ afsdf -t
>> Server Ptn SizeMB Used Avail. Pct Fu=
ll
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D
>> afsprs01.afs.storage a 2,096,124 1,669,362 426,761 79.6=
4%
>> afsprs01.afs.storage b 2,096,124 1,638,733 457,390 78.1=
8%
>> afsprs01.afs.storage c 2,096,124 1,686,377 409,746 80.4=
5%
>> afsprs01.afs.storage d 2,096,124 1,703,729 392,394 81.2=
8%
>> afsprs01.afs.storage e 2,096,124 1,670,024 426,099 79.6=
7%
>> afsprs01.afs.storage f 2,096,124 1,716,652 379,471 81.9=
0%
>> afsprs02.afs.storage a 2,096,124 1,701,536 394,587 81.1=
8%
>> afsprs02.afs.storage b 2,096,124 1,711,506 384,617 81.6=
5%
>> . . .
>> afsprs10.afs.storage e 2,096,124 1,385,650 710,473 66.1=
1%
>> afsprs10.afs.storage f 2,096,124 1,355,564 740,559 64.6=
7%
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D
>> Grand Total 125,767,440 97,068,722 28,698,717 77.1=
8%
>>
>> $ afsdf -T -s -u GB
>> Server Ptn SizeGB Used Avail. Pct Full
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D =3D=3D=3D=3D=3D=3D=3D =3D=
=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D
>> afsprs01 a 2,046 1,630 416 79.64%
>> b 2,046 1,600 446 78.18%
>> c 2,046 1,646 400 80.45%
>> d 2,046 1,663 383 81.28%
>> e 2,046 1,630 416 79.67%
>> f 2,046 1,676 370 81.90%
>> Subtotal 12,281 9,848 2,433 80.19%
>>
>> afsprs02 a 2,046 1,661 385 81.18%
>> b 2,046 1,671 375 81.65%
>> . . .
>> afsprs10 a 2,046 1,373 673 67.11%
>> b 2,046 1,355 691 66.24%
>> c 2,046 1,345 701 65.71%
>> d 2,046 1,377 669 67.29%
>> e 2,046 1,353 693 66.11%
>> f 2,046 1,323 723 64.67%
>> Subtotal 12,281 8,129 4,152 66.19%
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D =3D=3D=3D=3D=3D=3D=3D =3D=
=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D
>> Grand Total 122,819 94,793 28,026 77.18%
>>
>>
>> afsdf -h prints a quick help message, afsdf --usage shows you all the sw=
itches.
>>
>> Enjoy,
>>
>> Steve
>>